Mesh Patio Pet Doors are adjustable within the below measurements:

SML: 145.5cm - 214cm

MED: 155cm - 214cm

LGE: 162cm - 214cm

10cm Height Extensions are available as spare parts, a maximum of 3 x extensions can be used.

You can find flap adjustment and replacement instructions at the end of the installation videos below, or follow these easy steps:

Replacement/Adjustment

1. Remove the outer frame with the flap attached
2. Remove the screws at the top of the frame securing the flap
3. Using a flat head screwdriver, pry open the metal strip/bar that clasps the flap in place
4. Position new flap in frame, push down the strip/bar to clasp the flap in place and secure with screws
5. Screw the pet door frame back in place

Yes, replacement Locking Clips are available as a spare part.

Download instructions

The Mesh Patio Pet can be extended with a maximum of three (3) height extensions.

No Extensions = 2.14m
1 x Extension = 2.24m
2 x Extensions = 2.34m
3 x Extensions = 2.44m

Extensions are available here.

Unfortunately, we do not recommend using the patio pet door range in this type of setup. The product is designed to fit into the edge track of a sliding door. With dual sliding doors that meet in the middle, there is no edge track available for proper installation, which results in an unstable fit and can leave gaps.

For the best functionality and to avoid any potential issues, we recommend installing the pet door in a single sliding door setup where the edge track can securely hold the product.